Musical Light Show and Light Controllers

 

 
Outdoor Synchronized Musical Light Show, Chasing/Flashing 4-Channel Light Controller, 8-Function 4-Channel Light Controller

Click On Picture For Larger Image

 


Chasing Flash Light Controller with Speed Control Dial – 2 Channel Item Sku: WL-CONT-2-CH

Chasing Flash Light Controller with Speed Control Dial – 2 Channel


Indoor or Outdoor Use. A heavy-duty blinking/flashing light controller with 2 channels brings life to your lighted animation. Each channel (female plug end) flashes sequentially, which means that while the lights plugged in one channel are lit, the lights in the other channel are not lit, then the next channel will light while the previous channel is unlit, and so on. A simple knob on the front of the unit controls the speed that the channels “chase” each other; the slower the speed set on the dial, the longer one channel stays lit before the other channel lights. Each channel (female plug end) can handle 100 watts, which means you can plug up to 2 incandescent mini light 100-bulb sets be sure to check the wattage or up to 37 LED Standard Grade 70-light sets end-to-end into each channel, for example. UL Approved. 120V, 60Hz, 5 amps. Power cord 6' length; each output cord (channel) is 3' length with female plug end. Controller unit measures 2 1/2" wide, 3 3/4" height, 1" deep. Non-grounded unit. 120VAC, 60HZ use only. 5A fuse, spare fuse included. For use with Standard Grade LED light strings or incandescent light strings.
You can not control individual bulbs with a controller – only the whole set.
Chasing Flash Light Controller with Speed Control Dial – 3 Channel Item Sku: WL-CONT-3-CH

Chasing Flash Light Controller with Speed Control Dial – 3 Channel


Indoor or Outdoor Use. A heavy-duty blinking/flashing light controller with 3 channels brings life to your lighted animation. Each channel (female plug end) flashes sequentially, which means that while the lights plugged in one channel are lit, the lights in the other 2 channels are not lit, then the next channel will light while the others are unlit, and so on. A simple knob on the front of the unit controls the speed that the channels “chase” each other; the slower the speed set on the dial, the longer one channel stays lit before the next channel lights. Each channel (female plug end) can handle 100 watts, which means you can plug up to 2 incandescent mini light 100-bulb sets, check the wattage, or up to 37 LED Standard Grade 70-light sets end-to-end into each channel, for example. UL Approved. 120V, 60Hz, 5 amps. Power cord 6' length; each output cord (channel) is 3' length with female plug end. Controller unit measures 2 1/2" wide, 3 3/4" height, 1" deep. Non-grounded unit. 120VAC, 60HZ use only. 5A fuse, spare fuse included. For use with Standard Grade LED light strings or incandescent light strings
You can not control individual bulbs with a controller – only the whole set.
What is Pre-order?
$27.95  
Qty:  
$31.95  
Qty:

Chasing Flash Light Controller with Speed Control Dial - 4 Channel Item Sku: WL-CONT-4-CH

Chasing Flash Light Controller with Speed Control Dial - 4 Channel


Indoor or Outdoor Use. A heavy-duty blinking/flashing light controller with 4 channels brings life to your lighted animation. Each channel (female plug end) flashes sequentially, which means that while the lights plugged in one channel are lit, the lights in the other 3 channels are not lit, then the next channel will light while the others are unlit, and so on. A simple knob on the front of the unit controls the speed that the channels “chase” each other; the slower the speed set on the dial, the longer one channel stays lit before the next channel lights. Each channel (female plug end) can handle 100 watts, which means you can plug up to 2 incandescent mini light 100-bulb sets, check the wattage, or up to 37 LED Standard Grade 70-light sets end-to-end into each channel, for example. UL Approved. 120V, 60Hz, 5 amps. Power cord 6' length; each output cord (channel) is 3' length with female plug end. Controller unit measures 2 1/2" wide, 3 3/4" height, 1" deep. Non-grounded unit. 120VAC, 60HZ use only. 5A fuse, spare fuse included. For use with Standard Grade LED light strings or incandescent light strings
You can not control individual bulbs with a controller – only the whole set.
What is Pre-order?
8-Function Light Controller – 3 Channel Item Sku: WL-CONT-3-8F

8-Function Light Controller – 3 Channel


Indoor or Outdoor Use. A heavy- duty three channel sequencer brings life to your lighted animation. Eight functions are built into this weatherproof unit: combination, in waves, sequential, slo-glo, chasing/flashing, slow fade, twinkle/flash and steady on. One button on the front of unit changes the function. Recycle the power to the unit and it remembers which function was last running. The 3 channels work sequentially, which means that while one channel is functioning and lit, the other 2 channels are not lit, then the next channel will function while the other 2 are unlit, and so on. The only function that is synchronized (all channels lit at the same time) is the Slow Fade function. Each channel (female plug end) can handle 100 watts, which means you can plug up to 2 incandescent mini light 100-bulb sets, check the wattage, or up to 37 LED Standard Grade 70-bulb sets end-to-end into each channel, for example. UL Approved. 120V, 60Hz, 5 amps. Power cord 6' length; each output cord (channel) is 3' length with female plug end. Controller unit measures 2 1/2" wide, 3 3/4" height, 1" deep. Non-grounded unit. 120VAC, 60HZ use only. 5A fuse, spare fuse included. For use with Standard Grade LED light strings or incandescent light strings.
Note: Some half-wave rectified LED's may flicker when "steady on" and/or "slow fade" settings. We suggest removing the controller when leaving LED lights "on steady".
You can not control individual bulbs with a controller – only the whole set.
$33.95  
Qty:
$33.95  
Qty:  

8-Function Light Controller - 4 Channel Item Sku: WL-CONT-4-8F

8-Function Light Controller - 4 Channel


Indoor or Outdoor Use. A heavy- duty four channel sequencer brings life to your lighted animation. Eight functions are built into this weatherproof unit: combination, in waves, sequential, slo-glo, chasing/flashing, slow fade, twinkle/flash and steady on. One button on the front of unit changes the function. Recycle the power to the unit and it remembers which function was last running. The 4 channels work sequentially, which means that while one channel is functioning and lit, the other 3 channels are not lit, then the next channel will function while the other 3 are unlit, and so on. The only function that is synchronized (all channels lit at the same time) is the Slow Fade function. Each channel (female plug end) can handle 100 watts, which means you can plug up to 2 incandescent mini light 100-bulb sets, check the wattage, or up to 37 LED Standard Grade 70-bulb sets end-to-end into each channel, for example. UL Approved. 120V, 60Hz, 5 amps. Power cord 6' length; each output cord (channel) is 3' length with female plug end. Controller unit measures 2 1/2" wide, 3 3/4" height, 1" deep. Non-grounded unit. 120VAC, 60HZ use only. 5A fuse, spare fuse included. For use with Standard Grade LED light strings or incandescent light strings.
Note: Some half-wave rectified LED's may flicker when "steady on" and/or "slow fade" settings. We suggest removing the controller when leaving LED lights "on steady".
You can not control individual bulbs with a controller – only the whole set.
What is Pre-order?
$34.95  
Qty:

8 Funtion Controller 1 Channel Item Sku: ACSS

8 Funtion Controller 1 Channel


$36.95  
Qty:  
Note:
We suggest removing the controller when leaving LED lights "on steady".
You can not control individual bulbs with a controller – only the whole set.
A couple functions may not work well with some LED lights- like twinkle and fading.